Ask a transmission shop what kills transmissions and the answer is almost always the same: heat. The fluid is the transmission's coolant, lubricant and hydraulic lifeline all at once — and it is the one part of the transmission you can actually maintain. Once heat breaks the fluid down, wear, sludge, varnish and shudder follow, and the repair at the end of that road is a rebuild or a replacement.
Today's transmissions ask more of that fluid than ever. More gears, more clutch packs and narrower oil passages mean the fluid has to flow fast, hold its friction characteristics shift after shift, and keep working in sub-zero cold and towing heat alike. AMSOIL makes a synthetic fluid for each kind of transmission — conventional automatic, heavy-duty automatic, CVT and dual-clutch — because each one needs a different fluid. They are not interchangeable, and using the wrong one is an expensive mistake.
Use the table below to match your transmission to its fluid. If you are not sure what your vehicle has, check the specification in your owner's manual — or call me with the year, make and model and I will look it up.
Conventional automatic (car, SUV, light truck) — Daily driving, commuting, mostly highway → OE Multi-Vehicle ATF: Full synthetic protection through the manufacturer's recommended interval
Conventional automatic (truck, SUV) — Towing, hauling, plowing, hills, other severe service → Signature Series Multi-Vehicle ATF: Handles heat well enough to double the severe-service drain interval
Heavy-duty automatic (Allison, MAN, Voith, ZF and similar) — Work trucks, buses, motorhomes, mixed fleets → Torque-Drive ATF: Built for heavy-duty specifications, including Allison TES-295, TES-389 and TES-668
CVT (belt- or chain-type) — Cars and SUVs with a continuously variable transmission → AMSOIL CVT Fluid: Metal-to-metal friction properties that help prevent belt and chain slipping
Dual-clutch (DCT) — Performance cars and high-tech automatics with wet clutches → AMSOIL DCT Fluid: Engineered to prevent shudder, with fast, smooth shifts
Differentials and transfer cases that specify gear lube — Towing, off-road, 4x4 and Jeep use → SEVERE GEAR Gear Lube: Not a transmission fluid — a gear lube. See the driveline note below
One rule covers the whole table: the specification in your owner's manual decides. Every AMSOIL fluid below lists the specifications it is recommended for on its AMSOIL.com product page — match the spec, not just the transmission type, and never put a conventional ATF in a CVT or a DCT.
AMSOIL Signature Series Multi-Vehicle 100% Synthetic ATF is the fluid for hard-working vehicles that live in severe service: heavy towing, elevated temperatures and challenging terrain. It is formulated with high concentrations of antioxidants, making it naturally resistant to the heat that destroys ordinary ATF.
Best for: trucks and SUVs that tow, haul or plow, work vehicles, and any automatic you cannot afford to have down.
Heat — handles heat so well you can confidently double your vehicle manufacturer's severe-service drain interval, with guaranteed AMSOIL protection.
Proven over the long haul — after 180,000 miles in severe service, fluid analysis showed it still contained 83% of its original oxidation inhibitors.
Clean inside — after that same 180,000-mile severe-service test, the transmission's valve body was clean and virtually sludge-free, and the clutch plates showed only trace discoloration and earned the highest possible rating for deterioration and wear.
Reserve protection — provides reserve protection during heavy use and abuse, when a lesser fluid is already breaking down.
Cold — remains fluid in sub-zero temperatures, so cold starts in a Wisconsin January still shift the way they should.
Buy Signature Series Multi-Vehicle ATF on AMSOIL.com • Learn more: our diesel oil page
Towing with a diesel? The transmission is only half the driveline story — pair this fluid with the engine protection on our diesel oil page.
Not every vehicle tows. AMSOIL OE Multi-Vehicle 100% Synthetic ATF is the cost-effective choice for passenger cars and light trucks in normal service: it provides excellent wear protection, sludge resistance and extreme-temperature performance throughout the drain interval your vehicle manufacturer recommends.
Wear protection — resists wear to the valve body, gears, clutch plates and other vital parts, in normal and severe service alike.
Resists varnish and sludge — its thermally stable formulation resists the formation of varnish that can stick valves and threaten transmission performance and life.
Cold weather — remains fluid in sub-zero temperatures and flows quickly for fast, reliable shifts during cold starts.
Leak protection — formulated with seal conditioners that help prevent seals and gaskets from drying out and cracking, reducing the risk of fluid leaks.
Shift quality — friction modifiers promote fast, smooth clutch engagement and shudder-free shifts.
One limit to know: OE Multi-Vehicle ATF is not for use in CVT or Ford Type F applications. A CVT takes the dedicated CVT fluid further down this page.
Buy OE Multi-Vehicle ATF on AMSOIL.com
AMSOIL Torque-Drive 100% Synthetic ATF is built for heavy-duty automatic transmissions in on- and off-highway work — Allison, MAN, Voith, ZF and other heavy-duty transmissions, including specifications Allison TES-295, TES-389 and TES-668. It was engineered to eliminate the deficiencies common to conventional petroleum ATFs, and it is a multi-functional fluid, ideal for mixed fleets: one fluid that meets the most stringent heavy-duty specifications helps eliminate compatibility concerns and misapplication across a yard full of different trucks.
Best for: dump trucks, tow trucks, delivery and utility vehicles, buses and motor coaches, motorhomes, garbage haulers, emergency and school vehicles — and diesel pickups running an Allison transmission.
Built against breakdown — provides superior performance and protection against thermal and oxidative degradation, sludge and varnish formation, viscosity shear-down, cold-temperature thickening, poor friction stability and high component wear.
Wear protection — top-of-the-line synthetic base oils and premium additives deliver superior viscosity retention and high film strength to help prevent wear and reduce operating temperatures in severe service.
Friction durability — thermal and oxidative stability helps ensure consistent, smooth clutch engagement throughout the life of the fluid, and helps prevent clutch glazing and elongated shift times.
Cold flow — contains no wax, so it flows easily in cold temperatures for quick response on startup — the small, electronically controlled solenoids that manage shifts get fluid when they need it.
Service interval — recommended for use according to the extended service interval established by the manufacturer for the specifications listed on its product page.
Buy Torque-Drive ATF on AMSOIL.com • Learn more: our fleet page
A continuously variable transmission creates unlimited gear ratios with a belt or chain running between two variable-diameter pulleys. That design needs a fluid with specialized frictional characteristics, so the belt or chain stays in contact with the pulleys without slipping. A conventional ATF does not have those characteristics — which is why AMSOIL 100% Synthetic CVT Fluid exists as its own product, for belt- and chain-type CVTs.
No slipping — provides exceptional metal-to-metal frictional properties to help prevent belt and chain slipping and help extend transmission life.
Wear protection — effectively resists wear to the transmission's vital parts in normal and severe service, helping achieve long life.
Resists heat — its thermally stable formulation guards against thermal breakdown and resists the varnish formation that threatens transmission performance and life.
Quiet and smooth — provides superior wet-clutch performance for outstanding anti-shudder durability and reduced noise, vibration and harshness.
Field-proven — installed in four Las Vegas taxis, each driven 100,000 miles, it delivered outstanding protection in severe-service conditions.
CVT Fluid is Warranty Secure — it keeps your factory warranty intact — and it is backed by the AMSOIL Limited Warranty. Change it according to your vehicle manufacturer's recommendations.
Buy AMSOIL CVT Fluid on AMSOIL.com
A dual-clutch transmission is essentially two manual transmissions in one housing, with wet clutches doing the shifting. It needs a fluid that protects both the gear sets and the clutches at once, under high heat and high output. AMSOIL 100% Synthetic DCT Fluid is designed to protect high-tech dual-clutch transmissions during the most intense, high-heat operating conditions — and to deliver the fast, smooth shifts drivers expect from them.
No shudder — engineered to prevent shudder, with frictional properties that consistently produce fast, smooth shifts and promote stable synchronizer engagement.
Wear protection — resists extreme heat to protect gears, bearings and other vital parts, with high film strength and anti-wear/extreme-pressure additives.
Heat and oxidation — maintains proper viscosity at extreme temperatures, for complete protection in high-performance sports sedans and supercars.
Shear stability — resists shear and holds consistent viscosity even in the extreme stress of high-horsepower, high-torque applications, and stays stable in stop-and-go traffic.
Change DCT Fluid according to your vehicle manufacturer's recommendations, and match the specification your transmission requires — the product page lists them, including VW/Audi, Ford, BMW, Mercedes-Benz, Porsche and Nissan GT-R specifications.
Buy AMSOIL DCT Fluid on AMSOIL.com
While you are under the truck, remember the rest of the driveline. Differentials — and transfer cases and gearboxes that specify gear lube — do not take transmission fluid. They take gear lube, and for towing, hauling, racing, commercial use or other severe duty, that means AMSOIL SEVERE GEAR 100% Synthetic Gear Lube.
Barrier protection — proprietary additives form an iron-sulfide barrier coating on gear surfaces, defending against wear, pitting and scoring.
Controls heat — helps prevent "thermal runaway" — runaway friction and heat under high stress — and inhibits rapid lubricant degradation.
Stays in grade — high film strength holds its viscosity for lasting protection against metal-to-metal contact, in hot and cold extremes; wax-free construction improves cold flow.
Limited-slip ready — contains friction modifiers for limited-slip applications, and protects against rust and corrosion.
Buy SEVERE GEAR 75W-90 on AMSOIL.com • Learn more: our Jeep page
Transmission fluid rarely fails all at once. It fades — and the transmission tells you, if you know what to look for. Get the fluid checked soon if you notice any of these:
fluid that comes out dark brown or black, or smells burnt, instead of clean and red.
slipping — the engine revs but the vehicle hesitates to move or drops a gear under load.
shudder or vibration when the torque converter locks up, especially at steady highway speed.
harsh, delayed or hunting shifts, or shifts that feel different cold than warm.
a service history you cannot account for — if you bought the vehicle used and do not know when the fluid was last changed, assume it is due.
None of those signs fixes itself, and fresh fluid is cheapest before metal starts wearing. Towing, plowing, stop-and-go delivery work and hilly terrain all count as severe service — if that is your driving, follow the severe-service schedule in your owner's manual, not the standard one.
Cold is the other end of the test. Conventional fluid thickens in sub-zero weather, and a thick fluid is slow to reach the valve body and clutch packs — which is why a tired transmission often shifts worst on the first cold morning of the year. Around St. Croix Falls, that morning always comes.
Every fluid on this page is a full synthetic built for the cold as well as the heat: Signature Series ATF remains fluid in sub-zero temperatures, OE ATF flows quickly for fast, reliable shifts during cold starts, and Torque-Drive contains no wax and flows easily in cold temperatures for quick response on startup. Fresh synthetic fluid will not fix a worn transmission — but it removes the cold itself from the list of things working against it.
Cold weather works on the fuel side too — see our fuel additives page for diesel cold-flow protection.
Price a transmission rebuild once and the math on this page settles itself. A fluid and filter service costs a fraction of a rebuild — and a rebuild is what worn, overheated fluid eventually buys you. Judged against the repair it stands in front of, transmission fluid is one of the lowest-cost maintenance items on the whole vehicle, and it protects one of the most expensive.
Heat is what spends the fluid. A fluid that resists heat longer — Signature Series ATF doubling the severe-service interval, Torque-Drive holding its friction characteristics through a heavy-duty service life — stretches the time between services while it protects. Fewer services, on fluid that is still working at the end of the interval, is lower total cost of ownership, not just a longer receipt.
One truck down costs more than the fluid
For a business, the rebuild is only part of the bill. The bigger cost is the truck that is not earning while it sits in a transmission shop, the crew waiting on it, and the job that slips. AMSOIL makes the point on the Torque-Drive page itself: transmission operating expenses can be directly linked to transmission fluid quality, and vehicles stay on the road longer when the fluid holds up. A mixed fleet also saves on the shelf — one multi-functional Torque-Drive fluid covers the heavy-duty specifications across different makes, so there is less to stock and less chance of the wrong fluid going in.
Run a fleet, farm, shop or store? See our fleet page for the full driveline picture, and commercial, retail and installer accounts are on our accounts page — or call me and we will work out what your vehicles actually need.
JDK Synthetics does not take orders or payments on this website. Every buy link on this page goes to the product on amsoil.com with dealer number 30473491 attached, so your order ships from AMSOIL and credits this dealership. Prefer to save on every order? A Preferred Customer account, and commercial, retail and installer accounts for businesses, are explained on the accounts page.
See account options at jdksynthetics.com/accounts, browse the blog for maintenance guides, or start at jdksynthetics.com.
JDK Synthetics — John Koonce, Independent AMSOIL Dealer #30473491, St. Croix Falls, WI. Call 715-557-0782 with your vehicle and its transmission type and I will point you to the right fluid.
Can I use regular ATF in a CVT or a dual-clutch transmission?
No. A CVT needs fluid with the metal-to-metal frictional properties that keep its belt or chain from slipping on the pulleys, and a DCT needs a fluid built for its wet clutches and gear sets at the same time. AMSOIL states it plainly on the OE ATF page: that fluid is not for use with CVT applications. Match the fluid to the transmission type and to the specification in your owner's manual.
My manual says "lifetime" fluid — do I ever change it?
Heat and load break fluid down whether the schedule mentions it or not — and "lifetime" in a manual usually assumes normal service, not towing, plowing or delivery work. If your driving is severe, follow the severe-service schedule in the same manual. With Signature Series ATF, AMSOIL supports doubling the manufacturer's severe-service drain interval; with the OE, CVT and DCT fluids, follow the manufacturer's recommendation.
How often should transmission fluid be changed?
It depends on the transmission and how it is used, so the honest answer is your owner's manual's schedule — severe-service interval if you tow, haul, plow or drive mostly short trips and stop-and-go. Dark or burnt-smelling fluid, slipping or new shudder are reasons to move the service up, not wait for the mileage.
Will using AMSOIL transmission fluid void my warranty?
Use a fluid recommended for the specification your manufacturer lists, and keep your receipts. AMSOIL CVT Fluid is Warranty Secure — AMSOIL states it keeps the factory warranty intact — and AMSOIL backs its transmission fluids with the AMSOIL Limited Warranty. If your vehicle is under warranty and you are unsure which specification applies, call me before you order and we will confirm it.
Which fluid should a towing truck start with?
For a conventional automatic, Signature Series Multi-Vehicle ATF — it is the severe-service fluid, built for towing heat and backed for double the severe-service interval. If the truck runs an Allison or another heavy-duty automatic, start with Torque-Drive instead, and check the rest of the driveline — differentials included — while you are at it.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.